The EDC (Everyday Carry) tool contains all your essential trailside tools and can be conveniently stored inside your steerer tube/stem or the EDC Pump for quick and easy access. Add the optional Tubeless Plug Kit to your EDC tool to fix punctures fast.
STORYWe always prefer to ride without a backpack, whenever possible in Squamish. But no one wants to be 'that guy' who needs to borrow tools when out on a ride, or has to hike down the trail with a broken bike. We wanted a solution that would allow us to carry the essential tools that we need for every ride, without wearing a bulky backpack, which is why we created the EDC tool system.
Use multiple monitors when necessaryBy default, a full screen session is restricted to the monitor containing the server window. You can enable multiple monitor spanning in the full screen options. If the remote desktop is larger than window's monitor, it will span as many monitors as needed to fit the remote session. Note that only rectangular areas are used, so if you have two monitors with differing vertical resolutions, the shorter of the two is used. Also, there is a hard limit of 4096x2048 for the remote desktop control.
The maximum size of the remote desktop is determined by the version of the remote desktop activeX control. Version 5 (pre-Vista) had a maximum of 1600 x 1200; Version 6 (Vista) has a maximum of 4096 x 2048. This limit is enforced at connection time, not during data entry. This is in case the same RDCMan file is shared by multiple computers.
Typical port scanning tools report that the port has a LISTENING status if the target UDP port doesn't return an Internet Control Message Protocol (ICMP) \"Destination unreachable\" message. This result may not be accurate for one or both of the following reasons:
You can run PortQry at a command prompt in the same manner as any other command-line tool. Most of the examples in this article show command-line PortQry commands. In command-line mode, you can add multiple options to the command string to specify what query to run and how to run it. To run PortQry in command-line mode, run a command that uses the following syntax:
YUMI (Your USB Multiboot Installer) is a Multiboot USB Boot Creator that can be used to make a Multisystem flash drive. This tool can quickly create a Multiboot bootable USB flash drive containing several different ISO files. Use it to boot from USB your favorite Live Linux portable Operating Systems, Linux and Windows Installers, antivirus utilities, disc cloning, backup, penetration testing, diagnostic tools, and much more. This Universal tool makes it easy for anyone to create their own customized multi purpose Bootable USB.
Once the drive has been prepared, you can use the front end Installer to learn more about, find, or download distributions and tools to put on a select drive. The front end will create an organized folder structure and copy each ISO to the drive for you (recommended if you want the tool to keep track of your installations for removal). It can also create persistent storage files for you and the related .json entry. For example, each Ubuntu based distribution can have its own persistent storage up to 10GB. ;)
Here are some Bootable Live Linux Distros, Portable Operating Systems, Windows Installers, and tools that YUMI supports installing and booting from. Do note that these do vary between the exFAT, UEFI Boot, and Legacy BIOS variants. This list is somewhat comprehensive but not all inclusive.
The Legacy variant does not natively include files to make it UEFI Boot from USB. However, it is still possible to boot and run your Windows Installers from UEFI. To switch between added Windows versions, navigate to the multiboot/win-directory (replacing win-directory with the Windows version you want to boot) on your USB. Once there, move the bootmgr, bootmgr.efi, and entire boot folder to the root of your USB drive. Then reboot, booting your computer from the UEFI compatible USB. If all went well, it should boot straight into your chosen Windows Installer.
Most added distributions are stored within the multiboot folder. This is also the root directory set for syslinux. In some cases, the Volume Label of your USB drive must be MULTIBOOT in order for OpenSUSE, CentOS and several other distributions to boot. YUMI will attempt to automatically create this Volume Label, however it can sometimes fail. So please ensure that the Volume Label of your USB remains MULTIBOOT if you expect your distributions to boot.
Legacy only:From the multiboot folder on your flash drive, delete the hidden file ldlinux.sys and then rename the libcom32.c32 file to _libcom32.c32. Then use YUMI to install any menu item. The installer will notice that the file is missing and will then attempt to reinstall syslinux and repair the master boot record. Once finished, rename _libcom32.c32 back to libcom32.c32.
Persistently Saving Changes: YUMI uses the casper-rw persistence feature for some (but not all) Ubuntu based distributions. Yes, you can also have multiple persistent distributions, as each distro utilizes its own casper-rw file. * Persistence will not always work on NTFS formatted USB drives. Additionally, some distributions will not boot via NTFS.
The suite of tools in MULTI were created by Green Hills Software developers to form a complete environment specifically made to fit the needs of embedded software developers: Safety-certified C/C++ compilers and run-time libraries.
History viewer displays the last few seconds, minutes or days of program execution across complex heterogenous multicore systems with a natural and intuitive GUI. For the first time you now have a clear, complete view into a murky hardware and software system. You can zoom deeply into processor behavior at the micro-second level or zoom out to see system behavior spanning minutes and days. This new kind of visibility empowers you to find difficult bugs in seconds, see hidden bottlenecks and dependencies, and analyze execution times.
By automatically capturing actual program execution data TimeMachine enables the Debugger to run, step and debug code backward to any problem area shown in History. It also powers other tools such as the Profiler.
The MULTI Debugger is a powerful tool for examining, monitoring, and changing source code running on complex heterogenous multicore target processors and simulators. When TimeMachine is used, it can even run backward in time. The Debugger is seamlessly integrated with other tools within MULTI and can be invoked by clicking inside various MULTI tools such as the History viewer.
When you debug a multitasking application on an OS like INTEGRITY or Linux, MULTI can interact with the multiple tasks in run-mode, freeze-mode, or both modes simultaneously. In run-mode, the operating system kernel continues to run as you halt and examine individual tasks. In freeze-mode, the entire target system stops when you examine tasks.
Key among multicore debugging features is synchronous run control, which halts all cores as a unit when any core encounters a debugging condition. For instance, when a core hits a breakpoint the target list clearly shows:
Our Shuttle Driver can detect which application is currently active and will automatically switch to the corresponding shortcut profile. This is a great time saver for those projects that require the use of multiple apps simultaneously.
With the latest update to Lumix Tether the desktop software application has become a multi-tool for Lumix photographers and videographers as it pulls together the previous Lumix Tether, Lumix Tether For Streaming and Lumix Tether For Multicam into a single program. Now we only need a single piece of software to complete all the tasks we used to need three programs to do.
set \"DESCRIPTION=The Storage Sync Service is the top-level resource for File Sync. It creates sync relationships with multiple storage accounts via multiple sync groups. If this service is stopped or disabled, applications will be unable to run collectly.\"
The Camera Configuration Tool allows you to configure Pelco cameras that are discovered on your network. Apply common settings to multiple cameras at the same time, configure Pelco Smart Analytics, or adjust individual cameras to fit your site requirements. A license key is not required to use this tool.
Actual Multiple Monitors fills up the gaps in Windows user interface when working with several monitors at once. Install Actual Multiple Monitors to get such essential elements as Taskbar and Start menu on each connected display, quickly allocate windows between monitors (either manually or automatically), improve the look-and-feel of your desktop with the multi-monitor desktop wallpaper and screen saver, create as many desktop profiles as you need. With these subtle but indispensable enhancements your productivity may be increased several times! Read more.
Free multi-platform database tool for developers, database administrators, analysts and all people who need to work with databases. Supports all popular databases: MySQL, PostgreSQL, SQLite, Oracle, DB2, SQL Server, Sybase, MS Access, Teradata, Firebird, Apache Hive, Phoenix, Presto, etc.
Supplying a property or multiple properties will cause list to display the current value for that particular property or properties. Otherwise, if you wish to retrieve all the properties, run without arguments. Use this command only after a type has already been selected. If the value you are looking up is not available, it will return with no contents found for that property entry. 59ce067264